HOW TO CHOOSE THE RIGHT AIR COMPRESSOR

HOW TO CHOOSE THE RIGHT AIR COMPRESSOR

Before choosing any compressor to purchase, understanding the compressor’s uses will ensure that the machine can do the required job. Buying a compressor that is too small will waste valuable time. Buying a compressor that is way too large will waste valuable resources.

The questions that need to be answered are:

What is the maximum requirement of operating pressure?

This will determind the types of Air compressor to create needed pressure (bar, psi, kg/in2, kg/cm2…)

These figures denote the recommended pressure that the air is delivered from your compressor to the tool you’re using for optimal performance.

What is the maximun requirement of the air flow demand?

Add up all of the air tools that are to be used at the same time. When looking at the compressor, add approximately 30% to the determined air flow demand. This will allow for a reasonable buffer against unknown or uncommon compressor usage.

Where the air comprsesor will be located? Or the condition of using air compressor?

It’s mean that we need to choose indoor or outdoor units, stationary or portable units.

Determine whether or not the unit will need to be moved around your facility or work site regularly or if it will be a stationary unit. This will aid in determining other factors such as size and weight. Higher pressures and volumes will require the unit to be larger in size and heavier in weight since horsepower requirements, pumping systems, chassis construction, electrical components, etc… will have to be larger to accommodate these increases.

What receiver tank size will be needed?

The size of the compressor tank, usually measured in gallons, should be determined by the overall type of usage. If the usage is in short quick concentrated bursts, such as an air nailer, then a small tank size can be used. If the unit is to sustain long periods of usage, such as a board sander or impact wrench, a larger tank size will be necessary.

service repair - maynenkhiairman.com.vn

YORI EQUIPMENT CO., LTD

25/20 Pham Dang GIang St., Binh Hung Hoa Ward, Binh Tan district, HCMC

083 6206196 083 6203196

0937.288.969 | 0913.483.733

nguyenha@yori.com

nguyenha1711